The new MM992-2VD (Variable Distance) media module from Siemens enables the use of two-wire cabling, such as Profibus cables, for Ethernet communication, without the need for additional hardware such as modems. The MM992-2VD media module permits the transfer of data across distances of up to 1,000 meters. The bandwidth depends on the length and quality of the cable, but as a general rule, bandwidths of 100 Mbit/s can be implemented at a distance of 500 meters, and cables of 1,000 meters in length have bandwidths of 10 Mbit/s. Cables are connected to the media module via an RJ45 connector. The MM992-2VD media module can be used with all modular switches in the Scalance X-300 range, as well as with the Scalance S627-2M security module.
With the MM992-2VD media module, existing cable infrastructure within machinery and plants is able to be converted to an Ethernet network quickly and economically. This solution, developed by Siemens, represents an uncomplicated method of migrating to Profinet, particularly in view of the wide use of Profibus cabling.
In addition, the media module can be used within Ethernet networks to extend the maximum Ethernet cable length for bandwidths of 100 Mbit/s as defined in the standard - the MM992-2VD enables the simple integration of remote network nodes into plant networks at distances of over 100 and up to a maximum of 300 meters using standard copper cables instead of the glass fiber optic cables previously necessary for such Ethernet connections.
For further information about the new VD media module, see: www.siemens.com/vd
Kobe 10 ELite PE
The HCS HART Concentrator System converts a HART digital signal to a serial (RS-485 or RS-232) MODBUS RTU communication protocol. This allows HART transmitters and valves to interface directly with MODBUS-based monitoring and control systems.
The EK9300 PROFINET IO Bus Coupler from Beckhoff can connect different control networks with each other in a simple and efficient manner. This enables a PROFINET controller to exchange data with one or more EtherCAT, PROFINET, PROFIBUS and EtherNet/IP systems. Thus, the EK9300 can be used as a flexible gateway for real-time communication between these networks, with all the advantages provided by the EtherCAT network as an extremely high performance lower-level I/O system.
The VP-IR2 series IR illuminator is designed specifically to work with Moxa VPort series IP cameras and PT scanners. It features high power efficiency and a lower LED life cycle, and is suitable for all types of industrial surveillance applications. The VP-IR2 can be easily mounted on a VPort camera housing or IR bracket available for Moxa PT scanners.
Amplicon has recently introduced the new Moxa MGate 510, an IT-friendly Ethernet gateway for optimizing PROFIBUS/PROFINET automation networks.