12.5 µs cycle time, continuously maintained from the PLC to the I/O signals: This is eXtreme Fast Control – XFC. With the presentation at Hannover Messe 2012, Beckhoff was underlining its technological leadership in fast control technology. The components for this record-breaking system are: a high-performance CPU – a Beckhoff Industrial PC with control software to match – TwinCAT 3; ultra-fast I/O components – with 1 µs latency; and naturally the fast Industrial Ethernet system – EtherCAT.
“When we first presented EtherCAT in 2003, the performance of this new fieldbus technology was still miles ahead of the controller capability of the time. With TwinCAT 3 and the current IPC CPUs the gap is closing, although it's still not possible to foresee when we will be able to make the maximum EtherCAT data throughput fully usable for machine controllers”, says Dr. Dirk Janssen, Manager Software Development at Beckhoff and one of the inventors of EtherCAT. “With the 12.5 µs presentation we were showing what the Beckhoff system is capable of together with our EtherCAT Terminals.” Dirk Janssen says that the bus cycle time, while exciting, is actually in itself not decisive: “A fast fieldbus only becomes a fast control system with a capable controller and ultra-fast I/O components. And only with EtherCAT can the highest performance of the fieldbus be implemented continuously through to the I/O signals: All technologies that rely on bus couplers with a separate, local I/O bus suffer here from system-related disadvantages.”
Beckhoff New Automation Technology
อุปกรณ์กีฬาผู้ชาย ชุดกีฬา รองเท้ากีฬา