10222018Mon
Last updateMon, 27 Aug 2018 3am

NEMATRON gets Class I Division 2 approvals on iPC-Series Industrial PCs

The iPC-Series and nPC300 from NEMATRON now have Underwriters Laboratories (UL) approvals for Class I Division 2 Hazardous Locations for both the USA and Canada. In addition the testing for FCC and the European CE marks have been completed, therefore the compliance on these units are no longer pending as previously stated in the launch documents and datasheets .

The iPC-Series units are approved for Class I Division 2 Groups A, B, C, & D; Class II Division 2 Groups F & G; and Class III locations when properly installed on a flat surface of a Type 1, 4, 4x, or 12 enclosure with appropriate wiring provisions.

The nPC300 is approved for Class I Division 2 Groups A, B, C, & D locations when properly installed on a flat surface of a Type 1 (or better) enclosure with appropriate wiring provisions. Both types of units have a Temperature Code Rating of T6, which is better than the previous ePC-Series.

Product Website